Kontron AM4211 - Manual (Page 25)

10 AM4211
www.kontron.com
2.4 SFP+ Front IO
The front SFP+ cage supports a multi-rate fiber SFP+ module.
Table 2-1: SFP+ Connection
SFP+ module is not provided with the AM4211 and has to be obtained separately. The SFP+ uplink port is
compliant to the Enhanced 8.5 and 10 Gigabit Small Form Factor Pluggable Module “SFP+” MultiSource
Agreement (MSA), February 16th 2007, and the Improved Pluggable Formfactor MSA, February 26th 2007.
An application note with a list of SFP+ modules successfully operated by Kontron in the AM4211 is available
upon request.
The SFP+ port has a bi-color green/amber LED with the following signification:
Table 2-2: SFP+ LED Significations
2.5 Gigabit Ethernet
Two Gigabit Ethernet Ports are connected to ports 0 and 1 of the AMC connector.
SFP+ Connection
1 10 GbE XAUI
CAUTION LASER LIGHT!
Do not look into the laser beam!
The SFP+ module is fitted with a class 1 or 1M laser. To avoid possible exposure to
hazardous levels of invisible laser radiation, do not exceed maximum ratings.
LED Signification
Green on Link 10Gbit
Green blink Activity 10Gbit
Amber on Link 1000Mbit
Signal Path:
Two Gigabit Ethernet Ports are connected to ports 0 and 1 of the AMC connector.