Kontron KTQ67-FLEX MED - Manual (Page 81)

KTQ67/Flex -Medical Users Guide
KTD-N0849-D Page 81
10.2.10 Advanced - Acoustic Management Configuration
Note:
Automatic acoustic management (AAM) is a method for reducing acoustic emanations in AT Attachment
(ATA) mass storage devices, such as ATA hard disk drives and ATAPI optical disc drives. AAM is an
optional feature set for ATA/ATAPI devices; when a device supports AAM, the acoustic management
parameters are adjustable through a software or firmware user interface.
The ATA/ATAPI sub-command for setting the level of AAM operation is an 8-bit value from 0 to 255.
Most modern drives ship with the vendor-defined value of 0x00 in the acoustic management setting.
This often translates to the max-performance value of 254 stated in the standard. Values between 128
and 254 (0x80 - 0xFE) enable the feature and select most-quiet to most-performance settings along that
range. Though hard drive manufacturers may support the whole range of values, the settings are
allowed to be banded so many values could provide the same acoustic performance.
Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc.
Advanced
Acoustic Management Configuration
Automatic Acoustic Management
Sata Port 0
ST3120827AS
Acoustic Mode
[Disabled]
[Not Available]
Option to Enable or Disable
Automatic Acoustic
Management
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.15.1236. Copyright © 2012 American Megatrends, Inc
Function Selection Description
Automatic Acoustic
Management Enabled
Disabled Option to Enable or Disable Automatic Acoustic
Management.
BIOS - Advanced