Kontron VMP2 - Manual (Page 99)

VMP2 NetBootLoader
ID 24855, Rev. 02 © 2002 PEP Modular Computers GmbH Page 5 - 25
P C I
FUNCTION: Display PCI information
SYNTAX: pci
DESCRIPTION: The command “pci” is used to display detailed information on all
detected PCI devices. The bus number, device number, function
number, vendor, and device ID’s are displayed together with the
configured base addresses and the assigned IRQ number.
P F
FUNCTION: Set or display the serial port parameters (format)
SYNTAX: pf [ [][/[]
…[/[][/]]]]
where:
pf command
parameter: string: “term” or “ser0”
defines serial port to be configured
parameter: value: numeric: “50, 75, 110, 134.5,
150, 300, 600, 1200, 1800, 2000, 2400, 3600,
4800, 7200, 9600, 19200, 38400, 115200”
defines the baud rate for the port
parameter: value: numeric: “7” or “8”
defines the number of bits per character
parameter: string: “n” (none), “o” (odd), “e” (even)
defines parity to be used
parameter: value: number: “1”, “2”
defines number of stop bits