Kontron VMP2 - Manual (Page 95)

VMP2 NetBootLoader
ID 24855, Rev. 02 © 2002 PEP Modular Computers GmbH Page 5 - 21
USAGE: Program FLASH from data buffer to offset 0xF4240 and retain adjacent
FLASH contents
COMMAND / RESPONSE (none):
lf -o=f4240 -k
L O G I N
FUNCTION: Initiate ftp server session
SYNTAX: login []
where:
login command
parameter: value: numerical string
IP address of host: nnn.nnn.nnn.nnn
parameter: value: string
ftp server “username”
parameter: value: string
user’s password
DESCRIPTION: The command “login” is used to establish an ftp server session. The
“” must be specified as four numbers separated by single
dots. The “” parameter is not necessary if the server does
not request one.
USAGE: Initiate ftp server session
COMMAND / RESPONSE:
login 192.168.47.12 johndoe mypassword
(Response is dependent on the server accessed)
L O G O U T
FUNCTION: Terminate telnet session with NetBootLoader
L F