1 front panel i/o connectors, 1 front panel i/o connectors - 4, Vmp2 installation – Kontron VMP2 User Manual
Page 52
VMP2
Installation
ID 24855, Rev. 02
Page 3 - 4
© 2002 PEP Modular Computers GmbH
3.1.1
Front Panel I/O Connectors
ESD Equipment!
Your VMP2 board contains electrostatically sensitive devices.
Please observe the necessary precautions to avoid damage to
your board:
•
Discharge your clothing before touching the assembly. Tools
must be discharged before use.
•
Do not touch components, connector-pins or traces.
•
If working at an anti-static workbench with professional dis-
charging equipment, please do not omit to use it.
PEP Advantage
The VMP2 is designed to be bootstrapped from the Flash device
alone.
!
Attention!
Due care should be exercised when connecting cabling in order to
avoid damage to your connected device and/or the VMP2 board.
For pinouts of the Front Panel connectors, please see Chapter 2:
Functional Description, sections 2.4.3.2 and 2.4.3.3
- CP3003-SA uEFI BIOS (72 pages)
- CP3003-SA (36 pages)
- CP3002 (38 pages)
- CP3002-RC uEFI (64 pages)
- CP-RIO3-05 (42 pages)
- CP3002-RC (30 pages)
- CP342 (52 pages)
- CP930 (46 pages)
- CP932 (52 pages)
- CP346 (72 pages)
- CP384 (66 pages)
- CP383 (74 pages)
- CP382 (58 pages)
- CP381 (60 pages)
- CP372 (64 pages)
- CP371 (60 pages)
- CP-RIO3-04S (38 pages)
- CP390 (36 pages)
- CPS3410 (9 pages)
- CPS3402 (9 pages)
- CPS3105 (9 pages)
- CPS3101 (9 pages)
- CPS3003-SA (19 pages)
- PB-SIO4 (34 pages)
- PB-SIO4A (34 pages)
- PB-DOUT8 (34 pages)
- VMOD-2 (82 pages)
- VSBC-32 (110 pages)
- VM42 (62 pages)
- Bootstrap Loader (24 pages)
- VMP1 with Netbootloader (120 pages)
- VMP1 (106 pages)
- NetBootLoader (86 pages)
- VMP3 (154 pages)
- CP-RIO6-923 (32 pages)
- CP-RIO6-923-F (32 pages)
- CP-RIO6-001 (28 pages)
- CP-RIO6-001-HD-VGA (46 pages)
- CP-RIO6-M (20 pages)
- CP-RIO6-B (28 pages)
- CP6925 (42 pages)
- CP6002 uEFI BIOS (76 pages)
- CP6002 IPMI (40 pages)
- CP6002 (42 pages)