Kontron CP346 - Manual (Page 53)

CP346 Configuration
ID 27253, Rev. 03 © 2005 Kontron Modular Computers GmbH Page 4 - 5
P R E L I M I N A R Y
Depending on whether the RS485 mode is selected with or without local echo (refer to chapter
4.1.1 for the corresponding setting), the receiver RE signal is always “On” (with local echo) or
the RE signal is inverted to the activation/deactivation of the driver DE signal (without local
echo).
4.2 Software Configuration
Configuring is done as required using the drivers for Windows® 2000, Windows® XP, Win-
dows® XP Embedded, Linux® and VxWorks®. For driver installation, please refer to the driver
documentation supplied with the driver kit.
Note...
The hardware implementation on the CP346 works with low active DTR/RTS
handshaking.