Jeep 2015 Grand Cherokee SRT - User Guide - Manual (Page 29)

Memory Seat
The memory seat feature allows you to set two different driver seating positions
(excluding lumbar position), outside mirrors, radio station preset settings and
tilt/telescoping steering column position (if equipped). The memory seat buttons are
located on the driver's door panel.
To set a memory position:
1. Cycle the vehicles ignition to the ON
position.
2. Adjust all memory profile settings.
3. Press and release the S (SET) button.
4. Press and release the 1 or 2 button
within five seconds.
NOTE:
Before programming your RKE transmit-
ters you must select the “Personal Settings
Linked To Key Fob” feature through the
Uconnect
® system. Refer to “Uconnect ®
Settings ” in “Understanding Your Instru-
ment Panel” in the Owner's Manual on the
DVD for further details.
To program a Key Fob to the memory position:
1. Cycle the vehicles ignition to the OFF position.
2. Select the desired memory profile 1 or 2.
3. Once the profile has been recalled, press and release the SET (S) button on the
memory switch.
4. Within five seconds, press and release button (1) or (2) accordingly. “Memory
Profile Set” (1 or 2) will display in the instrument cluster.
5. Press and release the LOCK button on the RKE transmitter within 10 seconds.
NOTE:
To recall the saved positions, press 1 or 2 on the memory switch or press UNLOCK on
the programmed RKE transmitter.
Memory Seat Buttons
GETTING STARTED
27