Jeep 2015 Grand Cherokee SRT - User Guide - Manual (Page 224)

Component Fluid, Lubricant, or Genuine Part
Brake Master Cylinder We recommend you use MOPAR ® DOT 3
Brake Fluid, SAE J1703 should be used. If
DOT 3, SAE J1703 brake fluid is not avail-
able, then DOT 4 is acceptable.
Power Steering Reservoir – 3.6L Engine We recommend you use MOPAR ® Hydrau-
lic Fluid.
Power Steering Reservoir – 5.7L Engine We recommend you use MOPAR ® Power
Steering Fluid +4 or MOPAR ® ATF+4 ® Au-
tomatic Transmission Fluid.
SRT FLUID CAPACITIES
U.S. Metric
Fuel (Approximate) 25 Gallons 94 Liters
Engine Oil With Filter
6.4 Liter Engine (SAE 0W-40, Synthetic API Certified)
7 Quarts 6.6 Liters
Cooling System*
6.4 Liter Engine (MOPAR
® Antifreeze/Engine Coolant
10 Year/150,000 Mile Formula that meets the require-
ments of Chrysler Material Standard MS.90032.
16 Quarts 15.5 Liters
* Includes heater and coolant recovery bottle filled to MAX level.
FLUIDS, LUBRICANTS AND GENUINE PARTS — SRT
Engine
Component Fluid, Lubricant or Genuine Part
Engine Coolant We recommend you use MOPAR ® Antifreeze/Coolant 10
Year/150,000 Mile Formula OAT (Organic Additive Tech-
nology) that meets the requirements of Chrysler Material
Standard MS.90032.
Engine Oil For best performance and maximum protection under all
types of operating conditions, the manufacturer only rec-
ommends full synthetic engine oils that meet the Ameri-
can Petroleum Institute (API) categories of SN.
The manufacturer recommends the use of Pennzoil
Ultra™ 0W-40 or equivalent MOPAR ® engine oil meeting
the requirements of Chrysler Material Standard
MS-12633 for use in all operating temperatures.
Engine Oil Filter We recommend you use MOPAR ® Engine Oil Filters.
Spark Plugs We recommend you use MOPAR ® Spark Plugs.
Fuel Selection Premium Unleaded 91 Octane Only or Higher.
MAINTAINING YOUR VEHICLE
222