Utility – Jeep 2015 Grand Cherokee SRT - User Guide User Manual

Page 170

2. Pull the bottom of the cover outward (towards you).

3. Lower back down to disengage the tabs located at the top of the hitch receiver

cover and then pull outwards to remove.

To reinstall the hitch receiver cover after
towing repeat the procedure in reverse
order.

NOTE:
Be sure to engage all tabs of the hitch
receiver cover in the bumper fascia prior
to installation.

Hitch Receiver Cover

1 — Hitch Receiver Cover Retaining

Tabs

2 — Hitch Receiver Cover

3 — Locking Retainer

UTILITY

168

This manual is related to the following products: