Jeep 2015 Grand Cherokee SRT - User Guide - Manual (Page 120)

Setting The Time
• Model 8.4AN synchronizes time automatically via GPS, so it should not require
any time adjustment. If you do need to set the time manually, follow the
instructions below for Model 8.4A.
• Turn the unit on and press the “Time” display at the top of the screen. Press “Yes.”
• If the time is not displayed at the top of the screen, press the “Settings” button on
the touchscreen (if equipped), or the “Apps” or “Controls” button on the
touchscreen and then the “Settings” button on the touchscreen. In the Settings
screen, press the “Clock” button on the touchscreen, then check or uncheck this
option.
• Press “+” or ”–” next to Set Time Hours and Set Time Minutes to adjust the time.
• If these features are not available, uncheck the Sync Time box.
• Press “X” to save your settings and exit out of the Clock Setting screen.
Audio Settings
• Press the “Audio” button on the touchscreen to activate the Audio settings screen
to adjust Balance\Fade, Equalizer and Speed Adjusted Volume.
• You can return to the Radio screen by pressing the “X” located at the top right.
Balance/Fade
• Press the “Balance/Fade” button on the touchscreen to balance audio between
the front speakers or fade the audio between the rear and front speakers.
• Pressing the “Front, Rear, Left, or Right” buttons on the touchscreen or press and
drag the blue Speaker Icon to adjust the Balance/Fade.
Equalizer
• Press the “Equalizer” button on the touchscreen to activate the Equalizer screen.
• Press the “+” or “–” buttons on the touchscreen, or by pressing and dragging over
the level bar for each of the equalizer bands. The level value, which spans between
plus or minus 9, is displayed at the bottom of each of the Bands.
Speed Adjusted Volume
• Press the “Speed Adjusted Volume” button on the touchscreen to activate the
Speed Adjusted Volume screen. The Speed Adjusted Volume is adjusted by
pressing the volume level indicator. This alters the automatic adjustment of the
audio volume with variation to vehicle speed.
Surround Sound
• Press the “Surround Sound” button on the touchscreen, select On or Off followed
by pressing the “arrow back” button on the touchscreen. When this feature is
activated, it provides simulated surround sound mode.
ELECTRONICS
118