Selec speed control (ssc) — if equipped, Four-wheel drive models with mp3023, Two-speed transfer case only) – Jeep 2015 Grand Cherokee - Owner Manual User Manual

Page 486

Selec Speed Control (SSC) — If Equipped
(Four-Wheel Drive Models With MP3023
Two-Speed Transfer Case Only)

SSC is intended for off road driving in 4WD Low Range

only. SSC maintains vehicle speed by actively controlling

engine torque and brakes.
SSC has three states:

1. Off (feature is not enabled and will not activate)
2. Enabled (feature is enabled and ready but activation

conditions are not met, or driver is actively overriding

with brake or throttle application)

3. Active (feature is enabled and actively controlling

vehicle speed)

Enabling SSC
SSC is enabled by pressing the SSC switch, but the

following conditions must also be met to enable SSC:

• Driveline is in 4WD Low Range
• Vehicle speed is below 5mph (8 km/h)

Selec Speed Control Switch

484 STARTING AND OPERATING