Jeep 2015 Grand Cherokee - Owner Manual User Manual

Page 341

• Front ParkSense® Chime Volume
The Front ParkSense® Chime Volume settings can be

selected from the Driver Information Display (DID) or

Uconnect® System — if equipped. The chime volume

settings include LOW, MEDIUM, and HIGH. The factory

default volume setting is MEDIUM. To make your selec-

tion, press the “ParkSense® Front Chime Volume” button

on the touchscreen, until a check-mark appears next to

setting, indicating that the setting had been selected.

Press the back arrow button on the touchscreen to return

to the previous menu. ParkSense® will retain its last

known configuration state through ignition cycles.
• Rear ParkSense® Chime Volume
The Rear ParkSense® Chime Volume settings can be

selected from the DID or Uconnect® System — if

equipped. The chime volume settings include LOW,

MEDIUM, and HIGH. The factory default volume setting

is MEDIUM. To make your selection, press the

“ParkSense® Rear Chime Volume” button on the touch-

screen, until a check-mark appears next to setting, indi-

cating that the setting had been selected. Press the back

arrow button on the touchscreen to return to the previous

menu. ParkSense® will retain its last known configura-

tion state through ignition cycles.
• Tilt Side Mirrors In Reverse
When this feature is selected, the exterior side view

mirrors will tilt downward when the ignition is in the

RUN position and the transmission shift lever is in the

REVERSE position. The mirrors will move back to their

previous position when the transmission is shifted out of

REVERSE. To make your selection, press the “Tilt Side

Mirrors In Reverse” button on the touchscreen, until a

check-mark appears next to setting, indicating that the

setting had been selected. Press the back arrow button on

the touchscreen to return to the previous menu.

UNDERSTANDING YOUR INSTRUMENT PANEL 339