Jeep 2013 Grand Cherokee - User Guide - Manual (Page 92)

TOW/HAUL MODE
• When driving in hilly areas, towing a trailer, carrying a heavy load, etc., and
frequent transmission shifting occurs, press the TOW/HAUL switch to select
TOW/HAUL mode. This will improve performance and reduce the potential for
transmission overheating or failure due to excessive shifting. When operating in
TOW/HAUL mode, transmission upshifts are delayed, and the transmission will
automatically downshift (for engine braking) during steady braking maneuvers.
• The “TOW/HAUL Indicator Light” will
illuminate in the instrument cluster to
indicate that TOW/HAUL mode has
been activated. Pressing the switch a
second time restores normal operation.
If the TOW/HAUL mode is desired, the
switch must be pressed each time the
engine is started.
RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.)
Two-Wheel Drive Models
• Recreational towing is not allowed.
Quadra-Trac I® (Single-Speed Transfer Case) Four-Wheel Drive Models
• Recreational towing is not allowed. This model does not have a NEUTRAL position
in the transfer case.
Quadra-Trac II® /Quadra-Drive® II /Selec-Terrain™ Four-Wheel Drive Models
NOTE:
The transfer case must be in the NEUTRAL position, and the transmission must be
in the PARK position for recreational towing.
Shifting Into NEUTRAL
• Use the following procedure to prepare your vehicle for recreational towing:
• Bring the vehicle to a complete stop and shift the transmission to PARK. Turn the
engine off.
• For vehicles with Keyless Enter-N-Go™, remove the Keyless Enter-N-Go™ button
and use the Key Fob to complete this procedure.
UTILITY
90