Jeep 2013 Grand Cherokee - User Guide - Manual (Page 121)

Component Fluid, Lubricant, or
Genuine Part
Capacities
Transfer Case –
3.6L Engine
We recommend you use
Shell Automatic Transmis-
sion Fluid 3353.
—
Transfer Case –
5.7L Engine
We recommend you use
MOPAR ® ATF+4 ® Automatic
Transmission Fluid.
—
Axle Differential
(Front/Rear)
We recommend you use
MOPAR ® GL-5 Synthetic
Axle Lubricant
SAE 75W-85.
—
Axle Differential (Rear) –
5.7L Engine With
Electronic Limited-Slip
Differential (ELSD)
We recommend you use
MOPAR ® GL-5 Synthetic
Axle Lubricant SAE 75W-85
with friction modifier
additive.
—
Axle Differential (Rear) –
5.7L Engine Without
Electronic Limited-Slip
Differential (ELSD)
We recommend you use
MOPAR ® GL-5 Synthetic
Axle Lubricant
SAE 75W-85.
—
Brake Master Cylinder
We recommend you use
MOPAR ® DOT 3 and
SAE J1703. If DOT 3 is
not available, then DOT 4
is acceptable.
—
Power Steering
Reservoir – 3.6L Engine
We recommend you use
MOPAR ® Hydraulic Fluid.
—
Power Steering
Reservoir – 5.7L Engine
We recommend you use
MOPAR ® Power Steering
Fluid +4, MOPAR ® ATF+4 ®
Automatic Transmission
Fluid.
—
Fuel Selection –
3.6L Engine
We recommend you use
of 91 octane or higher for
optimum performance.
24.6 Gallons (93 Liters)
(Approximate)
Fuel Selection –
5.7L Engine
We recommend you use
of 91 octane or higher for
optimum performance.
24.6 Gallons (93 Liters)
(Approximate)
MAINTAINING YOUR VEHICLE
119