Jeep 2009 Wrangler Unlimited - Owner Manual - Manual (Page 270)

Air Conditioning
Normal Operation
Press this button to engage the air
conditioning. A light will illumi-
nate when the air conditioning
system is engaged. Once the air
conditioning is engaged, use a
combination of the mode control,
fan speed control, and tempera-
ture control to achieve your de-
sired interior temperature.
NOTE: The air conditioning compressor will not engage
until the engine has been running for about 10 seconds.
MAX A/C
For maximum cooling, select ei-
ther the Panel or Bi-Level position
using the mode control. Then,
press the “A/C” and the “Recir-
culation” buttons so that both
lights are illuminated, and set the
temperature control to its coolest
setting.
NOTE:
• Recirculation Mode will not operate in floor, mix or
defrost modes.
• Refer to “Recirculation Control” in this section, for
proper or extended use of this position.
268 UNDERSTANDING YOUR INSTRUMENT PANEL