Jeep 2009 Wrangler Unlimited - Owner Manual - Manual (Page 114)

3. Install the door frames. Refer to “Door Frame” in this
section.
4. If the soft top has been removed, follow these steps to
reinstall the soft top. If the soft top is on the vehicle,
proceed to step #5.
a. If the pivot brackets have been removed, unzip the
sport bar covers and attach the pivot brackets to the
sports bar with the four screws that were removed
using a #T30 Torx
௡ head driver. Re-cover and re-zip
the sport bar covers.
b. Lay the soft top into the rear of the vehicle with the
bows pointing forward and the curved portion of the
bows facing upward.
c. Tap the knuckles on the side with a rubber mallet to
reattach them to the metal pivot brackets.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE