Jeep 2008 Liberty - Manual (Page 292)

CAUTION!
Failure to follow the recommended downshifting
speeds may cause the engine to over speed and/or
damage the clutch disc even if the clutch pedal is
depressed.
FOUR-WHEEL DRIVE OPERATION
MP1522 Command-Trac ா Transfer Case — If
Equipped
Operating Information & Precautions
The Command-Trac
௡ transfer case provides four posi-
tions:
• 2 (rear) wheel drive high range.
• 4-wheel drive high range.
• Neutral.
• 4-wheel drive low range.
This transfer case is intended to be driven in the 2-wheel
drive position (2WD) for normal street and highway
conditions such as dry hard surfaced roads.
When additional traction is required, select the transfer
case 4WD Lock position or 4WD Low position. This
position locks the front driveshaft and rear driveshaft
together and forces the front and rear wheels to rotate at
the same speed.
Use the transfer case Neutral (N) position for recreational
towing only. Refer to “Recreational Towing” in this
section for specific procedures on shifting into and out of
Neutral (N).
292 STARTING AND OPERATING