beautypg.com

Jeep 2008 Liberty User Manual

Page 205

background image

NOTE:

Magnetic materials should be kept away from

the top of the right rear quarter window. This is where
the compass sensor is located.

NOTE:

The vehicle speed must be at 0 mph (0 km/h)

(manual transmission) or the gear selector lever in “P”
(Park) (auto transmission) to enter the variance setting
mode.

To set the variance, first, turn the ignition switch to the
ON position. Next, press and hold the trip odometer
button until the current variance zone number displays
(approximately ten seconds). Then, press and release the
button to increment the variance value by one, until the
proper variance zone is selected according to the map.
Finally, turn the ignition switch to the LOCK position to
exit this mode.

INSTRUMENT PANEL AND CONTROLS

205

4