Jeep 2008 Liberty - Manual (Page 147)

ELECTRONIC SPEED CONTROL — IF EQUIPPED
When engaged, this device takes over the accelerator
operation at speeds greater than 25 mph (40 km/h).
Electronic Speed Control Operation
The speed control lever is located on the right side of the
steering wheel.
To Activate:
Push and release the (“ON/OFF”) button lo-
cated on the end of the speed control lever. The
CRUISE indicator in the instrument cluster will
illuminate. To turn the system OFF, push and
release the (“ON/OFF”) button a second time. The
CRUISE indicator will turn off. Be sure to turn the system
OFF when not in use.
NOTE:
• The Electronic Speed Control System will automati-
cally turn off when the engine is turned off.
• The Electronic Speed Control System is designed to
shut down if you operate multiple speed control
switch-functions simultaneously (i.e. SET and CAN-
CEL). If this occurs, push and release the (“ON/OFF”)
button to reactivate the system and then reestablish
the desired SET speed.
Speed Control Lever
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147
3