Gastroback 42534 Design Grill-Barbecue Advanced - Manual (Page 12)

44
usIng yOur DesIgn grIll-BarBecue aDvanceD
first use
Before cooking, insert the plug into the outlet on the body, and the power supply plug into
the socket outlet.
1. Carefully unpack the appliance and place it on a suitable heat-resistant, level surface (see
Important Safeguards).
2. Remove any promotional stickers and packaging materials before use. Do NOT remove
warning hints and the model label.
3. Slide the grilling height control on the right metal arm of the top plate to the OPEN positi-
on. Then lift the top plate by the handle and ensure, that there are no foreign objects on the
cooking plates.
warnIng! Switch off, unplug and allow to cool down, before moving or cleaning the appli-
ance. Do not immerse the appliance or the power cord in water or other liquids or spill any
liquids on the appliance. Do not place the appliance in an automatic dishwasher.
note: Before first use and after a long period of storage, check that the cooking plates are
clean and free of dust. Wipe over with a damp cloth (see: ›Care and cleaning‹).
4. Then dry thoroughly and wipe the non-stick coating of the cooking plates with a little
amount of oil. This is to prepare the non-stick coating for use.
note: When using the Professional Grill for the first time you may notice a fine smoke haze.
This is caused by the first heating of some of the components. There is no need for concern.
To prevent smell and taste of your food from being affected, you should heat the appliance
on the SEAR position of the temperature dial for same minutes before placing any food on
the cooking plates.
1. Prepare the grill for use (see ›Operating your grill barbecue‹). With the temperature dial on
the SEAR position, wait about 15 minutes.
2. Then select the required temperature dial setting and use the handle to lift the top plate
to the vertical position. If necessary, wait some minutes for the grill to cool down to the set
temperature before placing your food on the cooking plates.
If the smoke haze persists on further use, switch OFF the grill, unplug, allow to cool down
and clean the appliance (see: ›Care and cleaning‹). If the problem still persists, return the
appliance to an authorised service centre for inspection.
You may use your Design Grill-Barbecue Advanced as an open grill (with the top plate fold
back) or as a closed grill. Prefer to keep the top plate closed for a shorter cooking time and
to avoid an unnecessary high energy consumption.
Operating your Design grill-Barbecue advanced
warnIng:
Risk of Burns! Do not touch hot surfaces! – The exterior of the grill, especially
the top plate, will get hot during operation! Solely use handles and knobs for handling the
appliance. Beware of hot condensate and steam, when opening grill.
You may use your Design Grill-Barbecue Advanced as an open grill (with the top plate fold
back) or as a closed grill. Prefer to keep the top plate closed for a shorter cooking time and
to avoid an unnecessary high energy consumption.