Gastroback 40963 Design Food Processor S - Manual (Page 23)

55 55
ditionally, the large universal ‘s’ blade and emulsifying disc are firmly locked for operation
via nozzles on the shaft.
Remainder of food and liquids could drop from the parts of the appliance, when disassem-
bling. Ensure that no liquids drip on the motor base, or any other delicate objects. Always
remove the bowl from the motor base first, and place it on a stable and water-resistant
surface, before opening the lid.
1. Switch OFF the ON/OFF switch (indicator goes out), wait until the motor comes to com-
plete standstill, and unplug the appliance from power outlet.
2. Remove the pusher. If you have used the lid for continuous feeding, remove the food
collector. Doing so, ensure not to spill the contents of the food collector. Tilt the food collector
a little for removing it from under the outlet.
CAUTION: Ensure that you do not spill the contents of the bowl, when removing it from the
motor base. Keep the bowl level.
3. Grasp the bowl at its handle and turn it counter-clockwise as far as it goes to release the
safety interlock. Then, keeping the bowl level, lift it from the motor base.
4. Place the bowl on a level, stable and water-resistant surface.
5. Turn the lid counter-clockwise as far as it goes to release the safety interlock. Then lift the
lid from the bowl.
WARNING: Do not touch the blades of the cutting tools. Only touch the cutting tools at the
black plastic parts. Do not use any hard or sharp-edged object with the appliance to avoid
damage to the surfaces.
6. Lift the tools out of the bowl: maybe small universal ‘s’ blade and bowl, or cutting disc,
shaft, perhaps assembled with universal ‘s’ blade.
7. Empty the bowl. For this, you can use a plastic or wooden spoon or the provided spatula.
8. If you used the universal ‘s’ blade, remove these tools from the shaft. However, do not use
violence! These tools are locked on the shaft via two notches.
Grasp the tool at the central plastic body. Then, using forefinger and thumb, push in the two
notches on the shaft and simultaneously slip the tool over the notches. Thereafter, you can
separate shaft and tool completely.
9. Clean all used parts and accessories, as described below.
Cleaning the appliance
WARNING: The blades of the cutting tools are very sharp. Handle with care to avoid
injuries.
Do not use any abrasive cleaners, cleaning pads (e.g. metal scouring pads), or any corro-
sive chemicals (e.g. bleach) for cleaning the appliance or any parts of it, to avoid damage
to the surfaces. Do not immerse the motor base or power cord in water or any other liquid.
Do not spill or drip any liquids on the motor base, or on the power cord to avoid risk of fire
and electric shock. Do not use violence! Do not pour any liquids in the central opening of the
container, while the container is mounted on the motor base.