Gastroback 40963 Design Food Processor S - Manual (Page 12)

44
Operation
WARNING: The appliance is intended for cutting and mixing food. For this, the appliance
is equipped with sharp knives and other electrically driven moving parts. DO NOT insert
your hands or any foreign objects (e.g. cooking utensils, clothes) in the feed tube, when the
appliance is connected to the power supply, to avoid risks of injuries and damage. Only use
the provided pusher for pushing food down in the feed tube.
Always switch OFF the ON/OFF button (indicator goes out) first, then unplug the appliance,
before assembling or disassembling any parts. Before operation, always ensure that you
have assembled the appliance completely and correctly according to the instructions in
this booklet, and that there are no foreign objects in the feed tube. Carefully remove hard,
inedible parts of your foods (e.g. bones, seeds, stalks, wooden shells) completely, before
processing.
Do not place clothes, tissues or any other foreign objects on or under the appliance during
operation. Do not place the appliance over a power cord. Do not use any hard or sharp-
edged objects (e.g. forks, knives), to avoid damage to the appliance. Do not use violence!
If liquids come out from under the lid, run down the exterior of the appliance and/or
accumulate under the appliance, immediately unplug the appliance to avoid injuries and
damage by electric shock. Always wipe off spilled liquids immediately. Do not overfill the
bowl. Always observe the maximum amount, given for the individual toolsets. If necessary,
empty the bowl regularly. If liquids accumulate again under the appliance, possibly the bowl
is leaking. (See: „Solving Problems“)
Preparing the appliance
WARNING: Only place the appliance on a stable, dry, level, and clean surface. Do not
place any clothes or tissue or other foreign objects on or under the appliance during operati-
on, to avoid risk of fire or electric shock. Do not block the ventilation slots at the bottom and
rear of the motor base. During operation, the buttons for operation must be accessible any
time.
Always ensure that the appliance is unplugged, before assembling or disassembling the
appliance.
Before assembling the appliance, always ensure that all parts and accessories you wish to
use are in proper working order (e.g. not cracked, chapped, broken or distorted). Do not
use any damaged parts to avoid risk of injuries and damage.
1. Place the motor base on a flat, stable, and moisture-resistant surface near a suitable wall
power outlet with the operating buttons facing to you. (See: Important Safeguards) Leave at
least 20 cm of free space to walls, curtains, boards and other objects on each side of the ap-
pliance. Leave at least 50 cm of free space above the appliance to get unhindered access.
Ensure that the appliance is unplugged.
2. Grasp the bowl by the handle and place the bowl onto the motor
base with the handle at the right side.
3. Carefully turn the bowl clockwise on the motor base to the stop, until
the handle is positioned above the buttons of the motor base. Ensure
that the bowl is locked firmly on the motor base and will not wobble.