Gastroback 41403 Design Mincer Plus - Manual (Page 8)

32
2. Carefully remove all shipping materials and promotional materials, but do not remove any
warning labels or the model label. Especially ensure that there are no foreign objects (e.g.
packaging) in the interior of the appliance.
WARNING! Always switch off completely (ON/OFF button) and unplug the appliance,
before cleaning. Do not immerse the motor housing or power cord in water or other liquids
or spill any liquids on the motor housing or power cord. Do not place the appliance or any
parts of it in an automatic dishwasher.
3. Before first use and after a longer period of storage, clean the appliance and all tools.
(See: ›Care and Cleaning‹)
Properties of your Design Mincer Plus
CAUTION: Do not operate the appliance continuously for more than 3 minutes. If you wish
to process larger amounts of food, always make brakes in between times, switching the
appliance off to avoid overheating.
The appliance is not suited for grinding very hard, very fibrous, or watery foods. Cook hard
vegetables (e.g. carrots) and leave to drain, and/or cut to small pieces, before processing
with the mincer. Do not process extremely watery foods (e.g. some fruits). Otherwise, juice
could run into the gear hole of the motor housing and cause damage to the motor.
Power switch / overheat protection
With the power switch on and the appliance connected to the power supply, the indicators
of the operating buttons on top of the motor housing (ON/OFF and REV) illuminate blue.
This appliance is equipped with an overheat protection that will automatically shut off the
appliance in case of overheating.
If your appliance suddenly stops running:
1. Immediately unplug the appliance.
2. Let the appliance cool down for 60 minutes.
3. Connect the appliance to the power outlet.
4. Press the ON/OFF button to switch the appliance off.
5. Press the power switch to turn on the appliance again.
6. Now you can turn on the appliance with the ON/OFF button.
Please contact you dealer of an authorized service centre if the overheat protection is acti-
vated too often.
The buttons ON/OFF and REVERSE
Using the operating buttons ON/OFF and REVERSE you switch the motor on and off.
For processing your food, generally use the normal forward operation, controlled via the
ON/OFF button.