Gastroback 40986 Vital Mixer Pro - Manual (Page 17)

57
speed level selection
Turn the rotary switch from the position ›MIN‹ to position ›MAX‹ (the three LEDs will go off).
The ›ice crusher‹/›smoothie‹/›nterval‹ buttons can not be pressed. You can regulate the speed
of the high-performance motor in 12 steps between ›MIN‹ and ›MAX‹ using the rotary switch
individually. To stop, press the stop button to turn it off, turn the switch to ›0‹ (switch position:
OFF) - the appliance is turned off when all the lights are off - wait until the motor has come to
a complete stop and pull the power plug.
Program selection
1.
Set the rotary switch to the ›program‹ position (the three Indicator lights
flash blue). Now the programs are selectable.
2.
Select the desired program (Ice Crush, Smoothie, interval).
»ice crush« program
Press the ›ice crush‹ button, the corresponding indicator lamp is light on (the other two indi-
cator lamps go out). The blender automatically starts the program with different speeds and
multiple breaks. The program automatically ends after about 68 seconds. Press the Stop button
to terminate the program prematurely at any time. When the program is finished, the three
indicator lights flash again.
»smoothie« program
Press the ›Smoothie‹ button, the corresponding indicator lamp is light on (the other two indi-
cator lamps go out). The blender starts an automatic program with different speeds to mix
smoothies. The program ends after about 60 seconds automatically. Press the Stop button
to terminate the program prematurely at any time. When the program is finished, the three
indicator lights flash again.
Note: The Smoothie function has a unique processing technique. Heavy and solid foods are
first processed with a slow speed. Once the food is thick, the speed increases automatically.
This can happen more often for the preparation of smoothies.
»interval« program
Press the ›Interval‹ button, the corresponding indicator lamp is light on (the other two indicator
lamps go out). The blender starts an automatic program with different speeds. The program
ends after about 43 seconds automatically. Press the Stop button to terminate the program
prematurely at any time. When the program is finished, the three indicator lights flash again.
3.
When the foods have the desired consistency, switch to Stop mode (press Start-/Stop-button)
and turn the rotary switch to position ›0‹ (switch position: OFF) - the appliance is turned off
when all lights are off - wait until the motor has come to a complete stop and pull out the power
plug from the outlet. Take the jug from the motor block by lifting it up from the motor block.
4.
Then remove the lid off the blender jug. Liquid products - from drink to viscous dough - you
can pour from the blender jug.
imPoRtaNt: Do not leave any food residue to dry on the parts of the appliance. Clean
the equipment immediately after each use according to the instructions ›Care and Cleaning‹.