Gastroback 40986 Vital Mixer Pro - Manual (Page 16)

56 57
Smoothie For processing of whole fresh fruit, smoothies, yogurt, ice cream, milk shakes, frappes and
smoothies.
Mixing Level 1-12 For individual stirring ingredients of various liquids and at the desired speed.
The length of mixing time depends on your personal preferences, the consistency of the
ingredients and the recipe.
Production steps
waRNiNg:
Ensure the blender jug is locked securely onto the motorblock
and that you can not knock the appliance over during operation to avoid
personal injury.
Connected the plug to the power outlet.
Note: The motor wont start before the appliance is set into operational mode and a function
is selected.
1.
If the appliance is properly assembled and securely locked onto the motorblock fill the
ingredients into the blender jug. Do not fill the blender jug above the ›MAX‹ line (1,75 litre).
imPoRtaNt: Pre-cooked ingredients should cool down before processing. Food with hard
texture should be cut in pieces of 2 cm size before filling them into the blender jug. Fill liquids
in first. Do not overload the blender jug to avoid spilling or overloading the motor.
2.
Place the lid on the blender jug and press the lid down to seal the top of the blender jug.
Close the opening of the lid with the inner lid.
Note: The blender lid is constructed to fit tightly onto the blender jug, avoiding displacement
during operation.
imPoRtaNt: Make sure that the inner lid is securely installed into the lid.
waRNiNg: Never take the blender jug off the motorblock, the lid of the blender jug or
place a spoon or other foreign substance into the blender jug while the motor is running.
Always turn the appliance off first and wait for the motor to stop moving. Now you can
remove the blender jug off the motorblock, remove the lid and check on the ingredients.
waRNiNg: Do not fill ingredients into the blender jug which exceed a temperature of
60 degrees. After processing ice cubes slowly heat up the blender jug before processing hot
ingredients. Otherwise the blender jug will crack or gets damaged. Use gloves processing hot
liquids. Ensure not to burn yourself on the blender jug, overrunning, spurt out or hot steam.
Remove the inner lid and cover the opening with a towel to release excess pressure and steam.
imPoRtaNt: Ensure the blender jug is properly locked on the motor block and stands
securely. The appliance does not work if the blender jug is not in proper position on the
motor block. If the blender jug is removed while the appliance is turned on, the lights go out.
3.
To start mixing (Mixing levels 1-12), select the required speed level (turning the rotary
switch to the selected level of 1-12. See: ›Selecting Speed levels‹) and press the Start-/Stop-
button.