Gastroback 40126 Design Juicer Pro User Manual

Page 14

DISASSEmBlING YOUR DESIGN JUICER

wARNING: Always turn the appliance

off and pull the plug when the appliance

is not in use or when disassembling,

moving or cleaning the appliance. Never

let water or other liquids run into the motor

block. Never clean the power cord or the

motor block in the dishwasher, pour liquids

over the appliance or douse or dip it in

water or other liquids.

Step 1:

Push the ›oN/oFF‹ button on the juicer

to ›oFF‹ and then switch off at the power

outlet and unplug.
ImPORTANT: Wait for the filter basket

to stop spinning before continuing to step

2 carefully remove the pulp container by

tilting the pulp container slightly to the right

and unlatch it from under the juicer cover

and the container support extending from

under the motor base (picture 1).

Step 2:

Pull the locking arm back over the grooves

on both side of the juicer cover (picture

2/3). Move the locking arm down.

Step 3:

Lift the juicer cover off the juicer (picture 4).