Archon, Connections – FBT Archon User Manual
Page 56
STEREO OUT CONNECTION
TO SPEAKER
POSITIVE OUT
NEGATIVE OUT
208S
ARCHON
DSP
IN L
IN R
OUT
CH2
IN CH2
OUT 2
ARCHON
52
208S / 215S
CONNECTIONS
Speakon connectors are connected in parallel mode. One connector can be used to connect the box to the output of a power
amplifier, the other to connect to a second box.
Loudspeaker cables shall have the adequate diameter, depending on the overall lenght of the connection. The resistance
introduced by an inadequate wiring towards the loudspeakers would reduce both the power output and the damping factor of
the loudspeaker.
THE ARCHON 208S / 215S ARE NOT
EQUIPPED WITH INTERNAL PASSIVE
CROSSOVER;
A CONNECTION TO THE
POWER UNIT WITHOUT PROCESSOR WILL
DAMAGE THE SPEAKERS.