Archon, 48 connections – FBT Archon User Manual
Page 52
48
CONNECTIONS
ARCHON
8
Ω
105
ARCHON
COM
NC NC
CONSTANT VOLTAGE LINE
Connect a conductor from the speaker terminal marked with “COM” to the 100V line in the amplifier terminal marked with “-“,
“
0”, “COM”.
Connect the other conductor, choosing between “HI” and “LO” depending on the desired power, to the 100V line in the
amplifier terminal marked with “100V”, “+”.
CONSTANT IMPEDANCE CONNECTION
NOTALLOWED on 100V lines.
Connect a conductor from the speaker terminal marked with “COM” to the amplifier terminal marked with “-”.
Connect a conductor from the speaker terminal marked with “8 Ohm” to the amplifier terminal marked with “+”.
The ARCHON series 105 / 106 / 108 models can be setup in constant impedance or constant voltage mode thanks to an
optional line transformer.
105 / 106 / 108
8Ω
105
ARCHON
COM
NC NC
HI LO