ETS-Lindgren 2005 Single Axis Positioner - Manual (Page 17)

Pre-Installation Tasks | 17
4.0 Pre-Installation Tasks
Before installing any components, follow the
safety information in the ETS-Lindgren Product
Information Bulletin included with your shipment.
Ensure power is off and base is secured before
proceeding with installation.
Pre-planning is essential for successful installation. Discuss requirements with
your sales representative and request dimensional drawings prior to construction
of your site.
Tools Required
• 3/8” open/box end wrench
• 7/16“ open/box end wrench
• 3/16” Allen wrench
• #2 Phillips screwdriver
• Wire cutters
• Pry bar
• Level (i.e. torpedo laser)
• Black marker
• Adjustable wrench
• Drill with 1” bit for filter penetration in shield
• 1/4” hex-head driver to open filter box
• Self tapping screws to mount filter
• Scouring pad suitable for cleaning stainless steel surfaces