Dave Smith Instruments PROPHET 12 KEYBOARD - Manual (Page 65)

55 Prophet 12 Operation Manual Appendix D: MIDI Implementation
Appendix D:
MIDI Implementation
Prophet 12 receives MIDI data according to the mode controls under
g
lobal
. In addition, there is interaction between some of the Program
parameters that determine the overall response of Prophet 12 to MIDI
data.
Following are the Global parameters that affect response to MIDI:
MIDI Channel: ALL, 1…16 — Selects the MIDI channel to send and
receive data, 1 to 16. All receives on any channel.
MIDI Clock Mode: See table — Selects the MIDI clock status as
follows:
Display MIDI Clock Setting
Off MIDI clock is neither sent nor received
Master MIDI clock is sent, but not received
Slave MIDI clock is received, but not sent
Slave Thru MIDI clock is received and passed to MIDI Out
MIDI Clock Cable: MIDI Port, USB— Selects the MIDI port by which
MIDI clock data is transmitted and received.
MIDI Parameter Send: NRPN, CC, Off— Changes to the values of
Prophet 12’s front panel controls are transmitted via MIDI as Non-regis-
tered Parameter Number (NRPN) controllers or as Continuous Control-
lers (CC). Transmission of parameters can also be turned off.
MIDI Parameter Receive: All, NRPN, CC, Off— Sets the method by
which Prophet 12 receives parameter changes via MIDI. As with trans-
mission, NRPNs are the preferred method, though some controllers may
only be able to send CCs.
MIDI Control Enable: Off, On— When On, the synth will respond to
MIDI control messages, including Pitch Wheel, Mod Wheel, Pedal,
Breath, Volume, and Expression.
MIDI SysEx Enable: Off, On— When On, the synth will respond to