Dave Smith Instruments PROPHET 12 KEYBOARD - Manual (Page 21)

11 Prophet 12 Operation Manual Global Settings
18 . Aftertouch Curve: Curve 1, Curve 2, Curve 3, Curve 4— Sets one
of four pressure curves for the keyboard to adjust the aftertouch to your
playing style.
19 . Velocity Curve: Curve 1, Curve 2, Curve 3, Curve 4— Sets one of the
four velocity curves for the keyboard to adjust the velocity response to
your playing style.
20 . Basic Patch— Press Write Now (soft key 1) to load a basic, template
program into the edit buffer. Use w
rite
to permanently save any changes
to memory.
21 . Calibrate Sliders— Press Start Cal (soft key 1) and follow the
onscreen instructions to calibrate the sliders.
22 . Calibrate Wheels— Press Start Cal (soft key 1) and follow the
onscreen instructions to calibrate the wheels.
23 . Autotune Filters— Press Start Tuning (soft key 1) and follow the
onscreen instructions to tune the low- and high-pass filters.
Note: The sliders, wheels, and filters are calibrated at the factory
and under normal circumstances should not require re-calibration or
re-tuning.
24 . Reset Globals— Sets the global parameters to the factory default
settings.
25 . Dump Current Program— Transmits the current program in SysEx
format via the selected MIDI port. (See “9. MIDI Sysex Cable.”)
Dumped programs will load back into the same bank and program loca-
tion in memory when received by the Prophet 12 via MIDI.
26 . Dump Current Bank— Transmits the current bank in SysEx format
via the selected MIDI port. (See “9. MIDI Sysex Cable.”) Dumped banks
will load back into the same bank location in memory when received by
the Prophet 12 via MIDI.
27 . Dump All User Banks— Transmits all four User Banks and the play
lists in SysEx format via the selected MIDI port. (See “9. MIDI Sysex
Cable.”) Dumped banks will load back into the same bank location in
memory when received by the Prophet 12 via MIDI.