Code 3 SuperVisor U - Manual (Page 7)

RECOMMEND 1/8" RADIUS 2X
RECOMMEND 1/8" RADIUS 2X
CUT OFF AS SHOWN FOR
DRILLED AND FASTENED
BRACKETS
USE HOLES AS A TEMPLATE TO
DRILL MOUNTING HOLES IN
VEHICLE AT DESIRED LOCATION
OUTER MOUNTING BRACKET
RECTANGULAR
INNER MOUNTING BRACKET
FIGURE 5
7
Installation and Mounting Instructions: Cont.
TO ADJUST LIGHT BLOCKER BRACKETS LOOSEN
THE FASTENING SCREW SLIGHTLY
TO ADJUST LIGHT BLOCKER BRACKETS, SWING
UP AS SHOWN UNTIL THE BRACKET TOUCHES
THE WINDSHIELD AND RETIGHTEN THE
FASTENING SCREW
FIGURE 6
Caution: Drilling into the housing of the light bar could damage wiring or other internal
components.