Code 3 MX 7000 - Manual (Page 14)

Operation: The Multi-Functional Intersection Control System will allow the user to obtain Takedown, Intersec-
tion and Alley functions with a single pair of intersection modules. The operation is as follows;
NOTE: Wiring Colors May Vary, Refer To Wire Tag For Exact Colors.
Passenger Side Alley - When the ( YEL/BLK ) wire is connected to a source of +12VDC the passenger’s side
intersection module will move to the alley position.
Driver Side Alley - When the ( YEL ) wire is connected to a source of +12VDC the driver’s side intersection
module will move to the alley position.
I ntersection - When the ( WHT/BLK ) wire is connected to a source of +12VDC both intersection modules will
oscillate. When Intersection mode is selected the Passenger side and Driver side Alley mode will be
overridden. The user cannot obtain Alley functions while in Intersection mode.
Takedown - When the ( ORG/BLK ) wire is connected to a source of +12VDC both intersection modules will
move to the takedown position. When in Takedown mode, the Alley and Intersection modes are overrid-
den.
NOTE: ALL DEVICES USED TO SWITCH +12VDC TO EACH CONTROL WIRE
MUST BE RATED FOR A MINIMUM OF 10A.
14