Code 3 Defender - Manual (Page 2)

2
Wiring Instructions (Read Care-
fully Before Installation)
Introduction
The DEFENDER® (Patent-Pending) Light bar Features the truly unique, TriCore® (Patent-Pending) Technology which constitutes a quantum leap
forward in signal brightness far exceeding the intensity and quality of any system. Unlike traditional LED Light bars that drop off at key angles, Tri-
Core maintains it's astonishing visibility a full 360 degrees. TriCore is also designed so that brightness won't fade. Watt for Watt, TriCore is the most
efficient emergency warning light ever made.
The DEFENDER is approximately 2.2" high, yet delivers 360° of unobstructed warning signal. The low profile and aerodynamic lines reduce air drag,
which results in fuel savings and stability at high speeds. The DEFENDER light bar also has an extruded internal frame that is 2X stronger, shock-
resistant polycarbonate lenses with an intermolded solar barrier, a modular lens design that enables almost any light bar length which can be created
from 3 lens lengths, and warning signals that exceed SAE standards.
The use of this or any warning device does not ensure that all drivers can or will observe or react to an
emergency warning signal. Never take the right-of-way for granted. It is your responsibility to be sure you can
proceed safely before entering an intersection, driving against traffic, responding at a high rate of speed, or
walking on or around traffic lanes.
The effectiveness of this warning device is highly dependent upon correct mounting and wiring. Read and
follow the manufacturer’s instructions before installing or using this device. The vehicle operator should insure
daily that all features of the device operate correctly. In use, the vehicle operator should insure the projection
of the warning signal is not blocked by vehicle components (i.e.: open trunks or compartment doors), people,
vehicles, or other obstructions.
This equipment is intended for use by authorized personnel only. It is the user’s responsibility to understand
and obey all laws regarding emergency warning devices. The user should check all applicable city, state and
federal laws and regulations.
Code 3, Inc., assumes no liability for any loss resulting from the use of this warning device.
Proper installation is vital to the performance of this warning device and the safe operation of the emergency
vehicle. It is important to recognize that the operator of the emergency vehicle is under psychological and
physiological stress caused by the emergency situation. The warning device should be installed in such a
manner as to: A) Not reduce the output performance of the system, B) Place the controls within convenient
reach of the operator so that he can operate the system without losing eye contact with the roadway.
Emergency warning devices often require high electrical voltages and/or currents. Properly protect and use
caution around live electrical connections. Grounding or shorting of electrical connections can cause high
current arcing, which can cause personal injury and/or severe vehicle damage, including fire.
PROPER INSTALLATION COMBINED WITH OPERATOR TRAINING IN THE PROPER USE OF
EMERGENCY WARNING DEVICES IS ESSENTIAL TO INSURE THE SAFETY OF EMERGENCY
PERSONNEL AND THE PUBLIC.
wARNINg!