BoonDocker POLARIS: 2011-14 PRO RMK 800 Intercooled - Manual (Page 2)

Revised 10/22/2014 Page 2 of ?
www.boondockers.com………………..... ……….………………....877-522-7805
1. 2.Remove stock air box, remove fuel line
bracket. Sand back surface flat for mounting.
3.Remove factory TBAP sensor from stock air
box and zip tie to over structure. 4. Un-bolt and un-strap the stock oil tank. Leave
oil line hooked up.
5. With ECU in place hold the fuel filter on the
back side of fuel line bracket to ensure proper
fitment, drill a 1/4” hole in the tab for bracket
mounting 6. Snap the fuel filter and fuel line into the fuel
line bracket and secure to clutch cover using the
1/4” bolt and lock nut. Reinstall the oil tank.
1. 1.Remove side panels, hood, seat, fuel tank, and
muffler. Save exhaust springs and rubber muf-
fler mounts for turbo install.