Step 6: install auxiliary fuel injector – BoonDocker ARCTIC CAT: Z1 Turbo Upgrade User Manual

Page 7

Text mode
Original mode

BoonDocker Turbo Z-1 GT28/60

Revised 06/05/09 Arctic Cat Z-1 GT28/60 Turbo Upgrade Installation instructions

Page 7

www.boondockers.com............................

BoonDocker

..........................................877-522-7805

Step 6: Install Auxiliary Fuel Injector

A. Should be completed before charge tub

installed. Install fuel injector, rail and brass
fitting into upper charge tube.

B. Install 5/16” brass tee into fuel presser

hose.

C. Install 5/16” hose from tee to fitting on fuel rail.

D. Tee red and purple wires from auxiliary injector harness to red and purple wires on female

Hijacker injector connector.

Use red wire in position #2