Catler ES 8012 - Manual (Page 39)

39 39
CARE AND CLEANING
CLEANING THE STEAM WAND AND FROTHING ATTACHMENT
• The steam wand and frothing attachment
should always be cleaned after frothing
milk.
• Remove the frothing attachment and rinse
in warm tap water.
• Wipe the steam wand with a damp cloth,
and then with the steam wand directed
back into the drip tray, briefl y set the steam
dial to the ‘STEAM’ position. This will clear
any remaining milk from inside the steam
wand.
• Ensure the steam dial is in the ‘STANDBY’
position. Press the POWER button to off and
allow the machine to cool.
• If the steam wand remains blocked, use the
pin on the cleaning tool to clear the open-
ing.
• If the steam wand continues to be blocked,
the tip of the steam wand can be removed
by using the fi tting in the middle of the
cleaning tool.
• Unscrew the top with the cleaning tool.
• Soak the tip in hot water before using the
pin on the cleaning tool to unblock. Replace
the tip back onto the steam wand and se-
cure with the cleaning tool.