Catler ES 8012 User Manual

Page 29

PROGRAMMING YOUR ESPRESSO MACHINE ES 8012

Pre-programmed dose - one cup

Press the one

cup button once. A preset dose

of approximately 30mls will be delivered.
A pumping noise will be heard in this operation.
The machine will automatically stop once the
preset pour has been delivered.

NOTE:
The amount of espresso extracted in the
cup will vary depending on your grind
and grind amounts.

NOTE:
When using a 1 cup filter, for optimal
flavour, you should only extract approx-
imately 30ml. When using a 2 cup filter,
for optimal flavour, you should only ex-
tract approximately 60ml.

Pre-programmed dose– double cup

Press the two cup

button once. A preset

dose of approx 60mls will be delivered. A pump-
ing noise will be heard in this operation.

The machine will automatically stop once the
preset pour has been delivered.

NOTE:
Pressing the one cup

or two cup

buttons during a programmed espresso
will immediately stop the pour.

Programming single espresso

1. Prepare to make a single cup of espresso

by following steps 2 to 6 in ‘A MINUTE TO
LEARN’ on pages 20-23.

2. Place your cup underneath the group head.
3. To begin programming, press the ‘PRO-

GRAM’ button once. The machine will beep
once and the program button will begin to
flash. This indicates the machine is in pro-
gramming mode.

4. Press the one

cup button once. The ma-

chine will commence normal pour function,
and the one cup button surround will begin
to flash.

5. When the desired amount of espresso has

poured into the cup, press the one cup

button to stop the pour. The machine will
beep twice, indicating it has saved your
measured pour quantity and exited pro-
gramming mode.