Salter Brecknell 7821 - Manual (Page 15)

Model 7821 Bench Scale User’s Manual 15 11
4. Use the ZERO key to toggle between the two
choices. Press the UNITS key when the
choice you want is displayed…
The choice is accepted and the display
shows FILT.
5. Press the ZERO key…
BAUD is displayed.
6. Press the UNITS key…
The current baud and parity choice is
displayed.
7. Use the ZERO key to scroll the choices
found in Table 2. When the choice you want
is displayed, press the UNITS key…
The choice is accepted and the display
shows BAUD.
8. Press the ZERO key…
PROT is displayed.
9. Press the UNITS Key…
The current protocol is displayed.
10. Use the ZERO key to scroll between the
three protocol choices. When the protocol
you want is displayed, press the UNITS
key…
The choice is accepted and the display
shows PROT.
11. When finished configuring the scale, press
the ZERO key, which displays DONE, then
press the UNITS key, DIAG is displayed, or
place Switch 1 back to the closed position to
return back to normal weighing mode.