Salter Brecknell 7820B - Manual (Page 9)

9 7820 B UPS Revenue Recovery Scale User’s Manual
Changing the
Weight Hold Settings
Weight Hold – Weights And Measures Sealing
Follow these steps to enter the Configuration mode and change the weight
hold settings.
1. Remove all weight from the scale and with the zero annunciator, >0<,
displayed, press and hold the HOLD key for 5 seconds. . .
bACLt is displayed.
2. Press the ZERO key once. . .
HoLd is displayed.
3. Press the HOLD key once. . .
AUto or SnGL is displayed.
4. Press the ZERO key to scroll to the other selection. . .
SnGL or AUto is displayed, depending on which mode is currently
selected.
5. With the desired setting displayed, press the HOLD key once to accept
the setting. . .
HoLd is displayed.
6. Press the ZERO key once. . .
donE is displayed.
7. Press the HOLD key to exit and return to normal weighing mode.
Menu Mode The 7820B powers up ready for weighing operations. Access the Menu
mode by setting Switch 1, shown in Figure 4, to the OPEN or Menu mode
position.
Figure 4
Switch location
To access Switch setting,
remove the weight platter.