Salter Brecknell 7820B - Manual (Page 8)

8 7820 B UPS Revenue Recovery Scale User’s Manual
Changing the
Backlight Settings
The AUto Weight Hold feature allows you to continue to hold the parcel
weight on the display, one at a time, for an unlimited number of parcels in
succession.
1. Press the HOLD key.
The “WT HOLD” enunciator will activate on the right side of the
display.
2. Place a parcel on the scale, then remove the parcel.
The scale will hold and display the weight value, then alternate
with the center-of-zero annunciator.
Once the parcel is removed, the display will alternate between the weight
hold value and zero weight every three seconds.
3. Place another parcel on the scale, then remove the parcel.
The scale will hold and display the new weight value.
4. Continue using Weight Hold for as many parcels as desired.
The AUto Weight Hold will deactivate when one of the following occurs:
• When you press the HOLD key.
• The scale’s Auto Shutdown mode activates after one hour of non-use.
Follow these steps to enter the Configuration mode and change the back-
light settings.
1. Remove all weight from the scale and with the zero annunciator, >0<,
displayed, press and hold the HOLD key for 5 seconds. . .
bACLt is displayed.
2. Press the HOLD key once. . .
AUto is displayed.
3. Press the ZERO key to scroll to the next selection. . .
oFF is displayed.
4. With the desired setting displayed, press the HOLD key once to accept
the setting
bACLt is displayed.
5. Press the ZERO key twice
donE is displayed.
6. Press the HOLD key to exit and return to normal weighing mode.
AUto or Multi-use
Weight Hold