Salter Brecknell 7820B - Manual (Page 7)

7 7820 B UPS Revenue Recovery Scale User’s Manual
Backlight Operation
AUTO (AUto)
OFF (oFF)
Weight Hold Operation
The display backlight operation is controlled by software in the Configuration
Mode. The settings are AUTO (AUto) or OFF (oFF). The default display
backlight setting is AUTO.
The backlight will turn off after 5 seconds of non-use at zero weight or 15
seconds of non-use with a weight value displayed. If you place a weight on
the scale or press the ZERO key the display backlight will activate.
Selecting oFF, will turn OFF the display backlight and maximize the battery
life.
The Weight Hold feature has two settings, SnGL or AUto.
The default setting is SnGL.
The SnGl Weight Hold feature allows you to hold the parcel weight on the
display for one parcel only.
1. Press the HOLD key. The “WT HOLD” enunciator will activate on the
right side of the display.
2. Place a parcel on the scale, then remove the parcel. The scale will hold
and display the weight value then alternate with the center-of-zero
annunciator.
The SnGl Weight Hold will deactivate when one of the following occurs:
1. When you press the HOLD key.
2. When you place the next parcel on the parcel scale and weigh it.
3. SnGL Weight Hold automatically deactivates after 15 seconds.
SnGl or Single-use
Weight Hold
During Weight Hold operations,
please allow the parcel weight
to stabilize on the scale for at
least 1 second.
In Weigh Hold mode, once a
parcel is removed the display
will alternate between the
weight hold value and zero
weight every three seconds.