Salter Brecknell 7820B - Manual (Page 6)

6 7820 B UPS Revenue Recovery Scale User’s Manual
HOLD key
Sleep / Auto Shutdown
Modes To conserve the battery life, the scale has two features, Sleep and Auto
Shutdown.
During Battery Operation:
1. The scale will enter into Sleep mode after 5 minutes of non-use. The
scale display will prompt SLEEP. Press the ZERO key to wake up the
scale and return to normal weighing mode.
2. The scale will enter into Auto Shutdown mode one (1) hour after enter-
ing into Sleep mode. Press the RESTART pushbutton located at the
rear of the scale, as shown in Figure 3, to turn the scale on and return to
normal weighing mode.
Figure 3
Restart button
During AC POWER Operation:
The scale will enter into sleep mode after 5 minutes of non-use. The scale
display will prompt CHArG. Press the ZERO key to wake up the scale and
return to normal weighing mode. The scale will return to zero weight within 5
seconds.
The HOLD key performs three functions:
1. This key will enable or disable the Weight Hold feature, which is used to
hold and display the stable weight of any large parcel that, when placed
on the scale, will block your view of the display.
2. When in the Configuration Mode menu, this key acts to ENTER or
ACCEPT the displayed selection. Refer to Weight Hold Operation.
3. Press and hold the HOLD key for 5 seconds to enter into the Configura-
tion menu.
The RESTART button is needed only during battery powered operation. If
the scale is not used for more than an hour the unit will power down to save
battery power. Press the RESTART button to restart the scale. RESTART button