Salter Brecknell 630 - Manual (Page 17)

xvii
5.4 USER MENU PROCEDURES
This section provides instructions for all of the User Menu procedures.
5.4.1 ID Number Entry (A8)
1. While in the User Menu mode, scroll to " A 8 ", then scroll down once using the 2 key
to enter the ID Number menu.
2. The display will momentarily show " ET ID ", followed by the current ID number value.
3. Use the front panel numeric keys to key-in the actual ID Number value. If you make
a mistake, press the CLR key to clear your entry and start over.
4. After entering the exact value, press the ENT key to save the ID Number value. The
display will show " END ID " momentarily, then revert back up to A8.
5.4.2 LF (Line Feeds) Number Entry (A9)
1. While in the User Menu mode, scroll to " A 9 ", then scroll down once using the 2 key
to enter the Line Feeds menu.
2. The display will momentarily show " ET LF ", followed by the current line feeds value.
3. Use the front panel numeric keys to key-in the actual line feeds value. If you make a
mistake, press the CLR key to clear your entry and start over.
4. After entering the exact value, press the ENT key to save the line feeds value. The
display will show " END LF " momentarily, then revert back up to A9.