Salter Brecknell 630 - Manual (Page 13)

xiii
4.3 USING THE TARGET VALUE
This function works in conjunction with the piece counting feature and allows your scale to act as a
checkweigher. This is useful if you are filling a container with a pre-determined amount of items.
To use, you must enter a target value. For example, if you wish to fill a bottle with 100 items you
would set your target value to 100.
If the number of items on the platform matches or exceeds the target value, the scale flashes the
TGT annunciator and beeps.
1. First, make sure the scale is in piece counting mode. If it is not, follow the sampling procedure
found in Section 3.3.5 or the alternative sampling procedure found in Section 4.1.
2. Use the numeric keys to key-in the target value then press the TARGET key.
3. Place items on scale until the scale signals that the items are equal to or greater than the target
value.
NOTE: To exit the target function, press the TARGET key once.