Salter Brecknell B140 - Manual (Page 21)

B140 Counting Scale User Instructions 21
2. When the count is displayed, press the Add Tot key to accumulate the count
to memory …
The count is added into memory and following is an example of what is
briefly displayed:
Add.xxx is displayed in the PIECE WEIGHT window. xxx = the number
of accumulations. You can accumulate up to 999 times. In this example
there has been only 1 accumulation.
The total accumulated count is shown in the COUNT window. In this
example the number of pieces counted is 1420.
The WEIGHT window shows the piece weight memory used for this
count. In this example PLU3 was used. If you are using a temporary
piece weight instead of a memory channel, TMP is displayed instead.
The display automatically returns to the normal counting mode after
three seconds.
3. Remove the items, allow the scale to return to zero and add more pieces to
count. Press the Add Tot key to accumulate the counts. Repeat this step until
all the pieces you want to count have been weighed and accumulated.
4. To view the accumulator data, press the Disp Tot key …
Below is an example of what is displayed:
You can see that a total of four accumulations have occurred, a total of
5642 pieces have been counted and that the piece weight stored in the
PLU3 memory location was used.
5. To clear the accumulator, press the Clear key while the accumulated data is
displayed.
COUNT
WEIGHT
STABLE AC CHG
Total lb kg Tare Zero
PIECE WEIGHT
COUNT
WEIGHT
STABLE AC CHG
Total lb kg Tare Zero
PIECE WEIGHT