beautypg.com

Coleman 16'X13' User Manual

16'x13' white pine, With screen room, Layout & positioning of tent

background image

16'X13' WHITE PINE

with SCREEN ROOM

1

Layout & Positioning of Tent

–Layout and position tent with screen room

facing desired direction. (illus. 1)

–Stake down tent corners. Do not stretch

too tight. Angle the stakes slightly toward
the tent. (illus. 2) Keep the floor taut.

–Stake down the remainder of the

stake loops and unzip doors.

–Assemble main tent poles (black)

and side tent poles (gray) by interlocking
the shock-corded sections.

–Insert the main tent poles (black) diagonally

through the pole sleeves. This will form an

“X” in the center of the tent. (illus. 1)

–Insert side tent poles (gray) through the pole

sleeves at the ends of the tent. (illus 1)

When You Are Ready To Set
Up Your Tent

–Select a level campsite clear of

rocks, branches and other hard
or sharp objects.

–Do not set up your tent

under trees.

–For best results in windy

conditions, position the end of
tent into the wind.

–See owners manual for more tips.

Main Tent Poles

Part No. 9271-166

Side Tent Poles

Part No. 9271-167

Screen Room Ridge Pole

Part No. 9271-162

Screen Room Upright Pole

Part No. 9271-168

Rainfly Part No. 9271-164

Rainfly Pole

Part No. 9271-161

Instructions apply to Part Number 9271-163

Illus. 2

Stake loops

properly staked

Front of
Screen Door

Main poles through pole sleeves

Illus. 1

Chain shock-corded

POLE ASSEMBLY PARTS

Connect Frame to Tent

–Insert one end of main tent pole end onto pin of pin &

ring system, nearest the middle of the tent. (illus. 3, 4)

–Go to opposite end of pole and gradually apply

pressure to the pole forming an arch until you are
able to insert the pin into the pole. (illus. 3, 4)

–Repeat for second pole.
–Insert one end of side tent pole end onto pin of

pin & ring system, at the corner of the tent. (illus. 3)

–Go to opposite end of pole and gradually apply

pressure to the pole forming an arch until you
are able to insert the pin into the pole.

–Repeat for second pole.
–Attach frame clips on the tent tent to frame poles.

(illus. 3, & 5)

2

illus. 5

Frame clips

illus. 3 Tent shown with
main and side tent poles in
place.

illus. 4
Pin & ring system located
on the front & rear of tent

Side tent
pole