AVer FX3000R - Manual (Page 47)

43
ENGLISH
6. Enable the type of event for the IP camera to trigger.
- Alarm Interval
This triggers the IP camera based on the time that use has set in Minutes column. The interval
time rage is 1~60 minutes.
- Motion Detection Region 1/2/3
This triggers the IP camera when a motion is detected on the motion detection region.
- Alarm Cross Detection Area 1/2
This triggers the IP camera when a cross detection is detected on the cross detection area.
- Tampering
This triggers the IP camera when tampering situation has met (Spray-painting, Intention Block
/Cover, Accidental redirection, or Defocusing). The tampering alarm selection will display only
when tampering function has enabled.
- Missing Object
This triggers the IP camera when a missing object is occurred. The missing object alarm
selection will display only when missing object function has enabled.