AVer FX3000R User Manual

Page 35

ENGLISH

System > Audio

Both admin and operator levels can configure the IP camera audio setting. After configuring the Audio

setting, click Save to apply the new setting and Cancel to keep the old setting.

Name

Function

(1) Audio

Select to enable/disable the IP camera built-in mic and mic port.

(2) Internal/External

MIC gain

Select to boost up the internal/external mic gain or set to normal.

(3) Audio Codec

Select the audio protocol, algorithm, and audio bit rate.

G.711: uses Pulse code modulation (PCM) of voice.

G.726: uses 40, 32, 24, 16 kbit/s adaptive differential pulse code

modulation (ADPCM)

AAC: uses AAC codec

(4) Alarm Audio

Select to choose from 2 types of alarms sound or customer alarm to

use the uploaded alarm sound. The supported sound format are in

*.wav (PCM 8KHz/16bit Mono, 10 seconds).

This manual is related to the following products: