AVer FX3000R - Manual (Page 22)

18
System > Security
Only admin levels can adjust the Image setting. There are 2 function tabs: IP Filter, 802.1x, RSTP
Auth...
System > Security > IP Filter
Enable Filter List: Select to turn the IP address filtering on or off.
Filter Type: Select to allow or deny the IP address in the filter list to access the IP camera.
Filter List: Create and display the filtered IP address.
To Add Filter
1. Click System > Security > IP Filter tab, then, click Add Filter.
2. In Rule drop down list, select from the 3 types of rules: Single, Network and Range.